Detroit Diesel MBE 4000 Service Manual page 71

Hide thumbs Also See for MBE 4000:

Table of Contents

www.rtrucks.ru

Installation

1. Connect all unit pumps, as removed.

2. Connect minidiag2 to the vehicle and clear all inactive faults.

Follow the equipment manufacturer's operating instructions.

3. Disconnect the compression tester gauge, (J 6692–B or 000 589 17 21 00) from the test

adaptor (J 45392 or 904 589 01 21 00).

4. Remove the compression test adaptor.

5. Install the injector nozzle. Refer to section 2.4.2

6. Install and tighten the tensioning arm.

[a] Position the tensioning arm on the nozzle and install the retaining bolt.

[b] Tighten the retaining bolt 50 N·m (37 lb·ft).

7. Install the cylinder head cover. Refer to section 1.1.2.

8. Repeat this procedure for each cylinder.

9. Remove the chocks from the tires.

All information subject to change without notice.

www.rtrucks.ru

MBE 4000 SERVICE MANUAL

www.rtrucks.ru

www.rtrucks.ru

Chapters

Table of Contents