Detroit Diesel MBE 4000 Service Manual page 505

www.rtrucks.ru
4. Remove the three air lines. See Figure 10-2.
1. Discharge Air Line
2. O-ring
3. 90 Elbow
4. Air Compressor
Figure 10-2
To avoid injury from the sudden release of a high-pressure
hose connection, wear a face shield or goggles.
[a] Remove the discharge (compressed air) line and the 90 elbow. Check inside the
discharge line for carbon deposits. If deposits are found, replace the discharge line.
NOTE:
The 90 elbow on the discharge line must be removed to allow removal of the engine
trim cover.
[b] Remove the unloader line. Check the fittings for damage and replace if necessary.
[c] Loosen the hose clamp and remove the intake (suction) air line.
All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
Air Line Attachments
PERSONAL INJURY
www.rtrucks.ru
MBE 4000 SERVICE MANUAL
5. Intake Air Line
6. Hose Clamp
7. Unloader Air Line
www.rtrucks.ru
10-5
www.rtrucks.ru