7.4
EGR COOLER AND COOLER SUPPORT BRACKET
www.rtrucks.ru
15. Fit lower coolant inlet pipe into the symmetric membrane. Install the two bolts in the
metal gasket and engine block. Also install bolt in pipe support bracket. Torque both
bolts to 35 N·m (26 lb·ft).
1. Lower Coolant Inlet Pipe
2. Membrane
3. Air Line Mounting Bolts
Figure 7-34
16. Tighten EGR shutoff valve using two bolts. Torque to 35 N·m (26 lb·ft).
17. Install and attach air supply line using two mounting bolts.
7-42
www.rtrucks.ru
Installing Coolant Inlet Pipe
www.rtrucks.ru
4. Shut off Valve Housing Bolt (2 qty.)
4. Air Supply Line
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru