Oil Spray Nozzle - Detroit Diesel MBE 4000 Service Manual

www.rtrucks.ru
3.2

OIL SPRAY NOZZLE

Perform the following procedures for removal and installation of the oil spray nozzle.
3.2.1
Remove the oil spray nozzle as follows:
NOTE:
These procedures refer to bolt-on oil spray nozzles only.
1. Remove the oil pan. Refer to section 3.1.1.
2. Open the inspection cover on the flywheel housing and install the engine cranking tool
(J 46167 or 407 589 00 63 00). See Figure 3-6. Rotate the crankshaft to gain access
to the nozzles.
1. Inspection Cover
Figure 3-6
All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
Oil Spray Nozzle Removal
Installing the Engine Cranking Tool
www.rtrucks.ru
www.rtrucks.ru
MBE 4000 SERVICE MANUAL
www.rtrucks.ru
www.rtrucks.ru
3-9