Detroit Diesel MBE 4000 Service Manual page 290

2.11 FUEL PUMP
www.rtrucks.ru
To avoid injury from the sudden release of a high-pressure
hose connection, wear a face shield or goggles.
2. Remove the fuel lines from the fuel pump. Discard the seal rings on the banjo fitting.
See Figure 2-24.
1. Fuel Pump
2. Banjo Fittings
Figure 2-24
NOTE:
Catch any fuel that runs out of the fuel pump or the fuel lines.
3. Remove the socket-head bolts attaching the fuel pump to the cylinder block. Discard
the gasket.
4. Slowly remove the fuel pump from the engine, taking care not to damage the splined
shaft on the fuel pump.
5. Discharge the fuel pump gasket.
2-44
www.rtrucks.ru
PERSONAL INJURY
Fuel Lines at the Fuel Pump
www.rtrucks.ru
3. Banjo (Hollow-Core) Bolt
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru