1.8
REAR RADIAL SEAL
www.rtrucks.ru
Position the rear seal installer on the receptacle, and press the seal in until it bottoms
out. See Figure 1-41.
1. Rear Radial Seal
Figure 1-41
3. Check the sealing lip on the radial seal to make sure it is positioned correctly.
4. Install the flywheel. Refer to section 1.12.2.
1-56
www.rtrucks.ru
Installing the Rear Radial Seal
www.rtrucks.ru
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru