Detroit Diesel MBE 4000 Service Manual page 448

7.4 EGR COOLER AND COOLER SUPPORT BRACKET
www.rtrucks.ru
7. Remove the two front sheet metal support-to-cooler support bolts (See number 1 in
graphic). See Figure 7-20.
1. Front Sheet Metal Support-to-Cooler Support Bolts
2. Front Sheet Metal Support
Figure 7-20
NOTE:
Do not remove the eight mounting bolts attaching the reed valve housing to the cooler
at this time. Also, do not remove the two EGR cooler-to-sheet metal support bolts at
this time. They will all be removed once the EGR cooler as an assembly is taken off
of the engine.
7-28
www.rtrucks.ru
Removing Front Sheet Metal Support
www.rtrucks.ru
3. EGR Cooler-to-Sheet Metal Support bolts
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru