Detroit Diesel MBE 4000 Service Manual page 322

3.2 OIL SPRAY NOZZLE
www.rtrucks.ru
3.2.2 Oil Spray Nozzle Installation
Install the oil spray nozzle as follows:
1. Install each nozzle in the block with the locator pin correctly installed. See Figure 3-9.
Tighten the hollow-core bolt 40 N·m (30 lb·ft).
1. Pin Seat
Figure 3-9
NOTE:
The locator pin on the base of the oil spray nozzle must be inserted into the pin seat in
the cylinder block until it engages.
2. Install the oil pan. Refer to section 3.1.2.
3. Fill the crankcase to the specified oil level. Do not overfill the crankcase.
3-12
www.rtrucks.ru
Installing the Oil Spray Nozzle
www.rtrucks.ru
2. Locator Pin
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru