Detroit Diesel MBE 4000 Service Manual page 181

www.rtrucks.ru
1.17.4
Replace the connecting rod bushing as follows:
Be careful to avoid damaging the bushing bore when
removing the bushing.
seize up suddenly, causing major engine repairs.
1. Rest the connecting rod on a flat surface. Using an appropriate drift, press the bushing out
of the connecting rod. See Figure 1-103.
1. Bushing
Figure 1-103
2. Check the bushing bore in the connecting rod. If surface material is missing from the
bushing bore, replace the connecting rod.
All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
Connecting Rod Bushing Replacement
Remove the Bushing
www.rtrucks.ru
NOTICE:
A damaged connecting rod can
2. Connecting Rod
www.rtrucks.ru
MBE 4000 SERVICE MANUAL
www.rtrucks.ru
1-133
www.rtrucks.ru