Detroit Diesel MBE 4000 Service Manual page 161

www.rtrucks.ru
Be careful not to scratch the crankshaft journals with the
connecting rod. This can lead to premature wear of the
crankshaft.
8. With the piston arrow pointing toward the front of the engine, push the piston into the
cylinder until the rod bearing rests on the crankshaft journal. See Figure 1-86.
1. Ring Compressor
2. Piston
Figure 1-86
9. Install the cap half of the bearing shell in the bearing cap, as marked on removal.
See Figure 1-85.
[a] Be sure that the locking lug in the bearing shell is fully seated in the groove of the cap.
[b] Lubricate the bearing surface with a light coating of clean engine oil.
All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
NOTICE:
Installing a Piston
www.rtrucks.ru
MBE 4000 SERVICE MANUAL
3. Cylinder Block
www.rtrucks.ru
1-113
www.rtrucks.ru