www.rtrucks.ru
2. Set up a dial gauge and dial gauge holder with a preload on the lower contact surface
of the cylinder head. See Figure 1-116.
1. Lower Contact Surface of Cylinder Head
2. Valve Head
Figure 1-116
NOTE:
Before doing this procedure, make sure the valve head is making contact with the valve
seat.
All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
Setting the Dial Gauge Preload
www.rtrucks.ru
MBE 4000 SERVICE MANUAL
3. Dial Gauge
4. Dial Gauge Holder
www.rtrucks.ru
1-151
www.rtrucks.ru