Detroit Diesel MBE 4000 Service Manual page 106

Hide thumbs Also See for MBE 4000:

Table of Contents

CRANKSHAFT ASSEMBLY

www.rtrucks.ru

Crankshaft Removal

Remove the crankshaft as follows:

1. Remove the engine.

To avoid injury from a falling engine, an adequate lifting

device with a spreader bar and sling should be used to lift

the engine. The sling and spreader bar should be adjusted

so the lifting hooks are vertical to prevent bending the lifter

brackets. To ensure proper weight distribution, all provided

lifter brackets must be used.

To avoid injury from a falling engine, ensure the engine

is securely attached to the engine overhaul stand before

releasing the lifting sling.

2. Mount the engine on an engine stand.

3. Remove the cylinder heads. Refer to section 1.2.1.

4. Remove the oil pan and oil pump. Refer to section 3.1.1. Refer to section 3.4.1.

5. Remove the flywheel and flywheel housing. Refer to section 1.12.1.

6. Remove the front cover housing. Refer to section 1.10.1.

7. Remove the pistons. Refer to section 1.17.1.

www.rtrucks.ru

FALLING ENGINE

www.rtrucks.ru

All information subject to change without notice.

www.rtrucks.ru

Chapters

Table of Contents