Detroit Diesel MBE 4000 Service Manual page 457

www.rtrucks.ru
4. Assemble the EGR reed valve housing flange, cooler intermediate flange, gasket and front
sheet metal support together. Attach all to the cooler housing using the eight mounting
bolts. Torque the bolts to 10 N·m (8 lb·ft). See Figure 7-29.
1. EGR Cooler-to- Sheet Metal Support Bolts
Figure 7-29
5. Attach the EGR cooler to the front sheet metal support with two bolts. Torque to 25
N·m (19 lb·ft). See Figure 7-29.
All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
Installing the EGR Cooler Flange
www.rtrucks.ru
MBE 4000 SERVICE MANUAL
2. EGR Cooler Flange Bolts
www.rtrucks.ru
7-37
www.rtrucks.ru