Detroit Diesel MBE 4000 Service Manual page 315

www.rtrucks.ru
6. Remove the standoff bracket attaching the dipstick guide tube to the oil fill tube.
See Figure 3-3.
1. Dipstick
2. Oil Fill Cap
3. Locknut
4. Flatwasher
Figure 3-3
7. Remove the dipstick guide tube, adaptor, and seal. Clean the guide tube and discard
the seal.
8. Remove the oil fill tube.
[a] Remove the bolt that fastens the oil fill tube retainer to the cylinder block.
[b] Remove the oil fill bolts and washers that fasten the oil fill tube to the oil pan. Save
the bolts and washers.
[c] Remove and discard the gasket on the oil fill tube. Clean the contact surfaces of the
fill tube and the oil pan, removing all traces of gasket material.
[d] Clean the oil fill tube.
9. Remove the oil pan from the cylinder block.
10. Remove and discard the oil pan gasket. Save the bolts.
11. Thoroughly clean the pan. Remove all traces of gasket material from the pan and from
the block.
All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
Standoff Bracket (exploded view)
www.rtrucks.ru
MBE 4000 SERVICE MANUAL
5. Connector
6. Dipstick Clamp
7. Oil Fill Tube Clamp
8. Bolt
www.rtrucks.ru
3-5
www.rtrucks.ru