Detroit Diesel MBE 4000 Service Manual page 263

Hide thumbs Also See for MBE 4000:
Table of Contents

Advertisement

www.rtrucks.ru
[a] Attach the adaptor to the torque wrench drive.
[b] The amount of torque you need to apply depends on the length of your torque
wrench.Examples: For a 12-inch torque wrench, tighten 27 N·m (20 lb·ft).
For a 24-inch torque wrench, tighten 25 N·m (18 lb·ft).
4. Install the cylinder head cover(s), as removed. Refer to section 1.1.2.
5. Prime the fuel system. Refer to section 2.1.2.
Diesel engine exhaust and some of its constituents are
known to the State of California to cause cancer, birth
defects, and other reproductive harm.
6. Run the engine and check for leaks. Tighten the connections as needed.
7. Shut down the engine and install the engine trim cover.
All information subject to change without notice.
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
PERSONAL INJURY
Always start and operate an engine in a well ventilated
area.
If operating an engine in an enclosed area, vent the
exhaust to the outside.
Do not modify or tamper with the exhaust system or
emission control system.
www.rtrucks.ru
MBE 4000 SERVICE MANUAL
www.rtrucks.ru
2-17
www.rtrucks.ru

Advertisement

Table of Contents
loading

Table of Contents