Oil Pan - Detroit Diesel MBE 4000 Service Manual

Hide thumbs Also See for MBE 4000:

Table of Contents

www.rtrucks.ru

OIL PAN

Perform the following procedures for removal and installation of the oil pan.

Remove the oil pan as follows:

1. Drain the engine oil. See Figure 3-1 for location of the drain plug. Discard the drain

To avoid injury when removing or installing a heavy engine

component, ensure the component is properly supported

and securely attached to an adequate lifting device to

prevent the component from falling.

2. Using a floor jack, jack up the vehicle and place it on stands located behind the front

3. Loosen all front suspension shackle bolts.

4. Remove the front spring bolts and shock absorber bolts. Using the floor jack, lower

the axle to the ground.

All information subject to change without notice.

www.rtrucks.ru

Oil Pan Removal

Engine Oil Drain Plug

PERSONAL INJURY

www.rtrucks.ru

MBE 4000 SERVICE MANUAL

www.rtrucks.ru

Table of Contents