Detroit Diesel MBE 4000 Service Manual page 138

Hide thumbs Also See for MBE 4000:

Table of Contents

www.rtrucks.ru

10. Inspect the flywheel bolts. Replace the bolts if any of the shanks are stretched beyond the

maximum length of 77.0 mm (3.03 in.). See Figure 1-66.

11. Thoroughly clean the flywheel and check the clutch surface for cracks, burned spots,

or scoring. If the damage exceeds the maximum depth of stock, replace the flywheel.

Refer to section 1.12.3.2.

12. Inspect the flywheel flange for signs of wear or traces of hollowing caused by the radial

13. Inspect the flywheel ring gear for damaged teeth or signs of wear. Replace the ring gear if

necessary. Refer to section 1.13.1.

Flywheel Installation

Install the flywheel as follows:

1. Grease the ring gear with a suitable heavy-duty grease.

www.rtrucks.ru

Measuring the Flywheel Bolts

www.rtrucks.ru

All information subject to change without notice.

www.rtrucks.ru

Chapters

Table of Contents