Detroit Diesel MBE 4000 Service Manual page 450

7.4 EGR COOLER AND COOLER SUPPORT BRACKET
www.rtrucks.ru
12. Loosen and remove the four bolts from the four tightening clamps that are holding the
EGR cooler to the cooler support bracket. Remove the four tightening tools for clamps
also. See Figure 7-22.
1. EGR Cooler
2. Tightening Tool for Clamps
Figure 7-22
NOTE:
The oil filter and oil filter cover should be removed for good clearance when removing
and installing the EGR cooler assembly.
7-30
www.rtrucks.ru
Removing Tightening Clamps on the Cooler
www.rtrucks.ru
3. Clamps (4 Qty.)
4. Clamp Bolts
6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION
www.rtrucks.ru
www.rtrucks.ru
All information subject to change without notice.
www.rtrucks.ru