34465A and 34470A Calibration Procedures
The following calibration procedures apply only to the 34465A and 34470A DMMs. Perform the cal-
ibration procedures in the order listed in this document. Use the arrow links at the bottom of every page to
go to the next calibration procedure.
1.
ADC and Zero Calibration
2.
AC Voltage Low Frequency Gain and Flatness Calibration
3.
AC Voltage Gain and Flatness Calibration
4.
AC Current Gain and Flatness Calibration
5.
AC Zero Calibration
6.
Frequency Accuracy Calibration
7.
DC Voltage Gain Calibration
8.
Ohms Gain Calibration
9.
DC Current Gain Calibration
10.
AC Current 10 A Gain Calibration
11.
DC Current 10 A Gain Calibration
12.
DC High Voltage Gain Calibration
13.
Capacitance Offset Calibration (Optional)
14.
Finishing Calibration
Keysight True volt Series Operating and Service Guide
Calibration Adjustment Procedures
First Procedure
555