Keysight Truevolt Series Operating And Service Manual page 403

SCPI Programming Reference
SYSTem:WMESsage "< string >"
SYSTem:WMESsage?
Displays a power-on message.
A quoted string of up to 40 characters. You can use letters (A-Z), numbers (0-9)
and special characters such as @, %, *, and so forth.
Default ""
Display a power-on message:
SYST:WMES "RETURN TO JOE AT POST D6"
Specifying a null string ("") disables the power-on message.
l
This setting is non-volatile; it is not changed by power cycling, a Factory Reset (*RST), or an Instru-
l
ment Preset (SYSTem:PRESet).
This parameter is set to its default value when the instrument is shipped from the factory and after
l
SYSTem:SECurity:IMMediate.
404
Parameter
"RETURN TO JOE AT POST
D6"
Keysight True volt Series Operating and Service Guide
Typical Return