Keysight Truevolt Series Operating And Service Manual page 121

Features and Functions
The Display and Digit Mask softkeys behave as they do in the
The Scale softkey specifies the horizontal scale:
Default sets the scale to equal the measurement range.
l
Manual allows you to configure the scale either as High and Low values or as a Span around a Center
l
value. For example, a scale that goes from a Low of -500 Ω to a High of 1000 Ω could also be specified
as a Center of 250 Ω with a Span of 1500 Ω.
Selecting a Secondary Measurement
Press 2nd Meas to select and display a secondary measurement. For example, for the DCV measurement
function, you can select ACV, Peak, or Pre-Math as the secondary measurement function. With ACV selec-
ted as secondary, the display shows the DCV measurement as a number near to top of the display, DCV in
the bar meter, and the ACV measurement above the bar meter:
122
Number display.
Keysight True volt Series Operating and Service Guide