Keysight Truevolt Series Operating And Service Manual page 114

The following table summarizes the various instrument display types for each measurement mode.
Mode Number Bar Meter
Continuous Power-on Number + bar
default, graph,
present meas- present meas-
urement on urement on
display. display.
Data Log Present reading on display.
All other points stored as
specified in Acquire menus.
Remaining time and remain-
ing samples displayed near
bottom.
Digitize Present reading on display.
All other points stored as
specified in Acquire menus.
Remaining time and remain-
ing samples displayed near
bottom.
Click a link below for more information on any of the display types:
Number
Bar Meter
Trend Chart (34461A/65A/70A only)
Histogram
Secondary Measurements
Keysight True volt Series Operating and Service Guide
Display Type
Trend Chart Histogram
Measurements spanning a spe-
cified amount of time, and dis-
played as strip chart (Trend), or
histogram. Exact measurement
values not accessible from
front panel.
Chart or Graph populated as
samples taken. Zoom, pan and
cursors available to facilitate
individual measurement view-
ing.
Chart or Graph populated as
samples taken. Zoom, pan and
cursors available to facilitate
individual measurement view-
ing.
Features and Functions
Comments/Uses
Trend and His-
togram data is
display only,
individual read-
ing values not
available from
front panel.
Standard on
the 34465A
and 34470A
only.
See Data Log
Mode for
details.
34465A and
34470A only,
requires DIG
option. Optim-
ized for high
speed sampling.
Max sample
interval 100 ms,
min 20 µs. See
Digitize Mode
for details.
115