Display Subsystem - Keysight Truevolt Series Operating And Service Manual

DISPlay Subsystem

This subsystem controls the instrument's display.
Command Summary
DISPlay[:STATe]
DISPlay:TEXT[:DATA]
DISPlay:TEXT:CLEar
DISPlay:VIEW
DISPlay[:STATe] {ON|1|OFF|0}
DISPlay[:STATe]?
Disables or enables the front panel display. When disabled, the display dims, and all annunciators are dis-
abled. However, the screen remains on.
Parameter
{ON|1|OFF|0}. Default: ON. 0 (OFF) or 1 (ON)
Turn display off:
DISP OFF
Disabling the display improves command execution speed from the remote interface and provides
l
basic security.
DISPlay:TEXT < string >
Sending
l
The display is enabled when power is cycled, or when you return to local (front panel) operation by
l
pressing the [Local] key.
DISPlay:TEXT[:DATA] "< string >"
DISPlay:TEXT[:DATA]?
Displays a text message on the front panel display.
A quoted string of up to 40 characters. You can use letters (A-Z), numbers (0-9) and special
characters such as @, %, *, and so forth.
Default ""
Show message on display:
DISP:TEXT "Test in progress..."
DISPlay:TEXT < string >
Sending
l
While a message is displayed, information relating to the current instrument operation is not sent to
l
the front panel display.
The display text is unaffected by *RST. It is cleared at power-on.
l
Keysight True volt Series Operating and Service Guide
Typical Return
will display the text even with
Parameter
will display the text even with
SCPI Programming Reference
DISP:STAT OFF.
DISP:STAT OFF.
Typical
Return
"Test in pro-
gress..."
259