Secondary Measurements - Keysight Truevolt Series Operating And Service Manual

Secondary Measurements

Most measurement functions allow you to select and display a secondary measurement function. Sec-
ondary measurements can be displayed in the Number and Bar Meter displays only. For example, a ther-
mistor temperature measurement (primary) and the resistance measurement made on the thermistor
(secondary) are shown below:
To select a secondary measurement from the front panel, first select the primary measurement function
and then press Display :
Press 2nd Meas and select the secondary measurement.
The primary measurement functions and their associated secondary measurements for each DMM model
are:
Primary Measurement Function 34460A/61A Secondary
DCV
ACV
2-Wire, 4-Wire Resistance
DCI
ACI
Frequency
Period
Temperature
Ratio
Capacitance
Cont
Diode
Keysight True volt Series Operating and Service Guide
Measurement Function
1
ACV
Frequency
1
ACI
Frequency
Period
Frequency
Sensor
Input/Ref
Features and Functions
34465A/70A Secondary
Measurement Function
1
ACV , Peak, Pre-Math
1
DCV , Frequency, Pre-Math
Pre-Math
1
ACI , Peak, Pre-Math
1
DCI , Frequency, Pre-Math
Period, ACV, Pre-Math
Frequency, ACV, Pre-Math
Sensor, Pre-Math
Input/Ref, Pre-Math
Pre-Math
None
None
93