Keysight Truevolt Series Operating And Service Manual page 401

SCPI Programming Reference
SYSTem:SECurity:IMMediate
(Requires the SEC option.) Sanitizes all user-accessible instrument memory except for the calibration con-
stants and reboots the instrument. This complies with requirements in chapter 8 of the National Industrial
Security Program Operating Manual (NISPOM).
Requires the optional security feature. See
The NISPOM Sanitize softkey and the SYSTem:SECurity:IMMEdiate command are equi-
valent. They are for customers, such as military contractors, who must comply with
NISPOM.
This feature destroys all user-defined state information, measurement data, and user-
defined I/O settings such as the IP address. This feature is not recommended for use in
routine applications because of the possibility of unintended data loss.
Parameter
(none)
Sanitize all user-accessible instrument memory:
SYST:SEC:IMM
Typically used before removing an instrument from a secure area.
l
Initializes all instrument settings to their Factory Reset (*RST) values. It also destroys all user-defined
l
state and preference information (see
Increments the security
l
SYSTem:TEMPerature?
Returns the instrument's internal temperature in °C.
Parameter
(none) +2.85000000E+01
Return the instrument's internal temperature:
SYST:TEMP?
The value returned is not affected by UNIT:TEMPerature.
l
402
Models and Options
Typical Return
(none)
MMEMory Subsystem - STATe and PREFerence
count.
Typical Return
for details.
Keysight True volt Series Operating and Service Guide
Files).