Web Interface - Keysight Truevolt Series Operating And Service Manual

DNS Server
DNS (Domain Name Service) is an Internet service that translates domain names into IP addresses. The
DNS server address is the IP address of a server that performs this service.
Normally, DHCP discovers DNS address information; you only need to change this if DHCP is unused
l
or not functional. Contact your LAN administrator for details.
This setting is non-volatile; it will not be changed by power cycling or
l
Front Panel:[Utility] > I/O Config > LAN Settings > Modify Settings
l
Then set the first softkey to Manual and press More and Primary DNS or Second DNS to enter a DNS
address using the front panel arrow keys.
SCPI: SYSTem:COMMunicate:LAN:DNS[{1|2}] "< address >"
l
If you change this parameter, you must either press the Apply Changes softkey (front panel) or send
l
SYSTem:COMMunicate:LAN:UPDate
Current Configuration (LAN)
Press [Utility] > I/O Config > LAN Settings to view the MAC address and current LAN configuration.
l
There is no equivalent SCPI command.
If the instrument goes into remote, all LAN changes will be canceled and the display will go to a dif-
l
ferent screen. Re-selecting the LAN Settings page will display the new settings if a LAN restart took
place.

Web Interface

The instrument includes a built-in Web Interface for remote instrument access and control over LAN via a
Web browser. For details, see
Keysight True volt Series Operating and Service Guide
(remote interface) for the change to take effect.
Web Interface.
Introduction to the Instrument
*RST or SYSTem:PRESet.
31