Keysight Truevolt Series Operating And Service Manual page 127

Features and Functions
Pan - Selects which reading in memory is displayed at the center of the screen. Use the up or right arrow
key to increase the reading number displayed - this causes the graph data to move to the left. Use the
down or left arrow key to decrease the reading number displayed - this causes the graph data to move to
the right.
Press and release an arrow key to move the cursor one display pixel. Hold down an arrow key to move the
cursor in 20 pixel increments. The number of readings represented per pixel depends on the zoom per-
centage.
Tip: Zoom to 100% to pan one reading at a time. After selecting a reading, you can then decrease the
zoom, if necessary, to view the surrounding signal.
Cursors - Display and control X1, X2, Y1, Y2, and tracking cursors (shown as lines) on the trend chart.
128 Keysight True volt Series Operating and Service Guide