Utility Menu - I/O Configuration - Keysight Truevolt Series Operating And Service Manual

Features and Functions

Utility Menu - I/O Configuration

I/O Config configures the I/O parameters for remote operations over the LAN (optional on 34460A), USB,
or GPIB (optional) interface.
LAN enables and disables the instrument's LAN interface, and LAN Reset resets the LAN using its current
settings and enables DHCP and mDNS. The LAN Reset softkey also clears any user-defined Web Interface
password.
LAN Settings
LAN Settings opens the menu shown below. Set to Defaults resets the LAN settings to their default val-
ues.
Modify Settings
Modify Settings enables DHCP or Manual (Auto-IP) assignment of the instrument's IP address. It also
enables configuration of network parameters based on the protocol (DHCP or Manual) selected.
For example, press Host Name or Service mDNS to modify the instrument's host name or mDNS Service
Name, shown below.
144 Keysight True volt Series Operating and Service Guide