Keysight Truevolt Series Operating And Service Manual page 269

SCPI Programming Reference
For firmware revision 2.0 and later , the identification string contains these four comma separated
l
fields:
Manufacturer name, Model number, Serial number, Revision code
If SYSTem:IDENtify DEFault
Keysight Technologies,34460A,<Serial Number>, h.ff.ff-pp.pp-mm.mm-gg.gg-bb-fp
Keysight Technologies,34461A,<Serial Number>, h.ff.ff-pp.pp-mm.mm-gg.gg-bb-fp
Keysight Technologies,34465A,<Serial Number>, h.ff.ff-pp.pp-mm.mm-gg.gg-bb-fp
Keysight Technologies,34470A,<Serial Number>, h.ff.ff-pp.pp-mm.mm-gg.gg-bb-fp
If SYSTem:IDENtify AT34460A or AT34461A
(34460A or 34461A only):
Agilent Technologies,34460A,<Serial Number>, h.ff.ff-pp.pp-mm.mm-gg.gg-bb-fp
Agilent Technologies,34461A,<Serial Number>, h.ff.ff-pp.pp-mm.mm-gg.gg-bb-fp
If SYSTem:IDENtify HP34401A
HEWLETT-PACKARD,34401A,<Serial Number>, h.ff.ff-pp.pp-mm.mm-gg.gg-bb-fp
If SYSTem:IDENtify AT34410A or AT34411A
(34465A or 34470A only):
Agilent Technologies,34410A,<Serial Number>, h.ff.ff-pp.pp-mm.mm-gg.gg-bb-fp
Agilent Technologies,34411A,<Serial Number>, h.ff.ff-pp.pp-mm.mm-gg.gg-bb-fp
Where:
h. - Hardware revision
ff.ff - Main firmware revision
pp.pp - Front panel firmware revision
mm.mm - Measurement board firmware revision
gg.gg - Measurement board FPGA revision
bb - Measurement board revision
fp - Front panel board revision
270
is set, the returned string has the following format:
is set, the returned string has the following format
is set, the returned string has the following format:
is set, the returned string has the following format
Keysight True volt Series Operating and Service Guide