Scpi Programming Reference; Related Information; Io Libraries And Instrument Drivers; Keysight Truevolt Series Documentation - Keysight Truevolt Series Operating And Service Manual

SCPI Programming Reference

SCPI Programming Reference
This section contains information to help you program the Keysight True volt Series digital multimeters
over a remote interface using the SCPI programming language.
Introduction to the SCPI Language
Commands by Subsystem
Command Quick Reference
SCPI Error Messages
Power-On and Reset State

Related Information

IO Libraries and Instrument Drivers

The Keysight IO Libraries Suite software and installation instructions are on the Keysight Automation
Ready CD-ROM provided with your instrument (optional for 34460A).

Keysight Truevolt Series Documentation

The latest product documentation is available at www.keysight.com/find/truevolt-doc. For doc-
umentation for mobile devices, see www.keysight.com/find/truevolt-mobilehelp.
For information about connecting instruments to USB, LAN and GPIB interfaces and how to configure and
troubleshoot these interfaces, refer to Keysight IO Libraries help. The Keysight IO Libraries can be down-
loaded from www.keysight.com/find/iosuite.

Web Interface

The 34461A/65A/70A and the 34460A (with option 34460A-LAN or option 3446LANU) have a Web Inter-
face built into the instrument. You can use this interface over LAN for remote access and control of the
instrument via a Web browser. See Web Interface for details.
194 Keysight True volt Series Operating and Service Guide