Calibration Adjustment Procedures
34460A and 34461A Calibration Procedures
The following calibration procedures apply only to the 34460A and 34461A DMMs. Perform the cal-
ibration procedures in the order listed in this document. Use the arrow links at the bottom of every page to
go to the next calibration procedure.
1.
ADC and Zero Calibration Procedure
2.
AC Voltage Low Freq Gain and Flatness Cal
3.
AC Voltage Gain and Flatness Calibration
4.
AC Current Gain and Flatness Calibration
5.
AC Zero Calibration
6.
Frequency Accuracy Calibration
7.
DC Voltage Gain Calibration
8.
Ohms Gain Calibration
9.
DC Current Gain Calibration
10.
AC Current 10 A Gain Calibration
11.
DC Current 10 A Gain Calibration
12.
Capacitance Offset Calibration (Optional)
13.
Finishing Calibration
540
First Procedure
Keysight True volt Series Operating and Service Guide