Alphabetical Scpi Command Summary - Agilent Technologies 8711C Service Manual

Alphabetical SCPI Command Summary

his section contains the service-related HP-IB mnemonics recognized by the analyzer with a
short description of each command. All commands have a query form unless speci ed in the
\Form" column as command only or query only. o change a command into a query, add a \?".
he \Form" column also gives the parameter type returned by the analyzer in response to
a query. NR1 (integers), NR2 ( oating point numbers with explicit decimal point), and NR3
( oating point number in scienti c notation) refer to di erent types of numeric data. CHAR
(character data) and S RING (string data, enclosed in quotes) are also used to describe response
types. hese parameter types are described in the \SCPI Command Summary" section in the
Programmer's Guide
Command
DI Gnostic:B NDcross [:ST Te] OFF
DI Gnostic:CCONstants:COPY
DI Gnostic:CCONstants:DEFaults
DI Gnostic:CCONstants:ER Se: EEPRom
DI Gnostic:CCONstants:LO D
DI Gnostic:CCONstants:INSTalled?
DI Gnostic:CCONstants:STORe:DISK
DI Gnostic:CCONstants:STORe:EEPRom
DI Gnostic:CPU:MEMory[:WORD] addr num
>
data num
DI Gnostic:SNUMber string
*IDN?
*OPT?
j
SENSe[1 2]:CORRection[:ST Te] ON
TEST:RESult?
>
TEST:SELect num
>
TEST:ST Te string
>
TEST:V Lue num
*TST?
5-14 Serv ce Related Menus
.
Table 5-6. Alphabetical SCPI Command Summary
j j j >
0 ON 1
>
>
j j j >
1 OFF 0
Form
NR1 (HP 8713C/14C Only) Turns bandswitching on or o .
Command Copy correction constants from EPROM to R M.
Command Restore the default correction constants to EPROM
and R M.
Command Erase EPROM.
Command Load correction constants from internal disk drive.
Query Query if correction constants are installed. Returns a
only NR1 \1" if true, and a \0" if false.
Command Store correction constant data to a le on the internal
disk drive.
Command Store correction constant data from the R M bu er
into ash EPROM.
NR1 Write a 16-bit data value to a 68030 address. Query
returns an integer with the 16-bit value at the selected
address.
STRING Store a serial number into memory. The string must be
10 characters long. The query form returns the
current serial number.
Query Return a string that uniquely identi es the analyzer,
STRING including model number, serial number, and rmware
revision.
Query Return a string identifying the installed options, in the
STRING form \1E1, 1C2, etc . . . "
NR1 Switch measurement calibration ON or OFF.
Query Query the result of the selected adjustment or
CH R self-test. Response will be NULL
NR1 Select the adjustment or self-test to execute.
CH R Select the state of the active adjustment or self-test.
Choose from RUN
j
will be NULL
NR1 Set or query a value for an adjustment or self-test.
Query Returns the result of a complete self test. n SCII 0
NR1 (zero) indicates no failures found. ny other character
indicates a failure.
escription
j j
P SS F IL.
j j
CONTinue STOP. Query response
j
P US DONE.