Disconnection From Supply Source; Disconnection From Supply Source; Disconnecting Device - Agilent Technologies ENA Series Installation And Quick Start Manual

Installation
Starting the E5061A/E5062A
Figure 2-10 Line switch (Always ON) and power cable receptacle

Disconnection from Supply Source

The power supply of the E5061A/E5062A is cut off by disconnecting the plug of the power
cable (on either AC outlet side or E5061A/E5062A side). When it is necessary to
disconnect the power supply in order to avoid shock hazards, etc., pull out the power cable
plug from either the AC outlet side or the E5061A/E5062A side.
NOTE To allow this operation to be performed smoothly, be sure to follow the guidelines in
"Ensuring Adequate Free Space around Analyzer for Immediate Disconnection of Power
Cable in Case of Emergency" on page 20.
When turning the power OFF under normal circumstances, always follow the methods
described in "Turning the Power OFF" on page 31.
32 Chapter 2