8
Maintenance
Replacing Leak Handling System Parts
When required
Tools required
Parts required
Preparations
1 Pull the leak funnel out of the leak funnel holder.
2 Pull out the leak funnel with the tubing.
3 Insert the leak funnel with the tubing in its position.
4 Insert the leak funnel into the leak funnel holder.
Leak funnel and
holder
Leak tubing
Figure 67
5 Replace the front cover.
148
If the parts are corroded or broken
None
Leak funnel 5061-3356
Leak funnel holder 5041-8389
Leak tubing (120 mm) 0890-1711
Remove the front cover.
Replacing Leak Handling System Parts
1100 Series DAD and MWD User Manual