Operation At Power On; Selectype Mode; Control Panel Operation In Selectype Mode; Main Menu Options In Selectype Mode - Epson Stylus Pro 9000 - Print Engine Service Manual

EPSON Stylus Pro 9000

1.2.1.2 Operation at Power On

Pressing these buttons at power on puts the printer in one of the
following service-related modes. See
page 17 for details.
Table 1-2. Operation at Power On
Button (Second function)
Power
Pause (Reset)
SelecType
Cut/Eject (Enter)
Paper Feed U
Paper Feed D
Paper Source (Item)
Cleaning
Paper Source, Paper Feed D, Cut/Eject
Paper Source, Cut/Eject, Cleaning
Paper Feed D, Cut/Eject, Cleaning
Printer Basics
Service-Related Modes on
Function
—
Maintenance Mode
See Maintenance Mode on page 17
—
Maintenance Mode 2
See on page 17
Maintenance Mode 2
Firmware Update Mode
See ROM Backup and Updating
page 105
Self-Diagnostic Mode
See on page 107
Self-Diagnostics

1.2.2 SelecType Mode

The SelecType menus allows you to configure printer settings and
perform certain maintenance operations from the control panel. To
access these menus, press the SelecType button while the printer is not
printing. The printer enters the SelecType mode and cannot print.

1.2.2.1 Control Panel Operation in SelecType Mode

The control panel buttons have the following functions in this mode:
Table 1-3. Operation in SelecType Mode
Button (Second function)
Power
Pause (Reset)
SelecType
Cut/Eject (Enter)
Paper Feed U
Paper Feed D
Paper Source (Item)
Cleaning
on

1.2.2.2 Main Menu Options in SelecType Mode

Table 1-4 lists the menus and where to find additional information.
Table 1-4. SelecType Menus
Menu
Printer Setting Configure the printer
Test Print Print a nozzle check or status check
Printer Status Check ink levels and component life
Function
—
Selects menu
Confirms and saves value
Increases a value
Decreases a value
Selects item within a menu
—
Description For more
information
page 14
page 15
page 15
13