Paper Jam Removal - Epson TM-U925 Manual

3.13 Paper Jam Removal

1) Around the print head
To remove jammed paper from the print head area, loosen the thumb screw on the right side of the
print head cover and remove the print head cover.
CAUTION: · Since the print head becomes very hot just after printing, remove jammed paper
only after the print head cools sufficiently.
· The carriage moves to the specified position after the printer is reset or paper is fed.
Do not touch the carriage.
2) Near the paper feed roller or cutter
To remove jammed paper from the paper feed roller or cutter, open the cutter unit by pushing it and
the lock lever backward.
To close the cutter unit, push the lock lever forward while pushing the cutter unit down gently.
Pull in the cutter blade by rotating the cutter manual-operation gear in the direction of the arrow.
3) If the cutter unit is not completely closed, the printer cover cannot be completely closed.
4) Paper from the paper roll can be removed by pulling the paper out while pushing the release lever.
EPSON
TITLE
TM-U925
Specification
(STANDARD)
SHEET NO.
REVISION
NEXT
A
50
SHEET
49