Release Sensor Removal; Carriage Home Position (Hp) Sensor Removal - Epson Stylus 1500 Service Manual

Release Sensor Removal

1. Remove the upper housing. (See page 3-7.)
2. Disconnect the cable from the connector on the sensor.
3. Remove the sensor from the left frame. (Insert tweezers to release the hook securing the sensor
to the left frame. Then pull the sensor off, as shown in the figure below.)
Twe eze rs
Figure 3-11. Removing the Release Sensor

Carriage Home Position (HP) Sensor Removal

1. Remove the upper housing. (See page 3-7.)
2. Disconnect the cable from the connector on the sensor.
3. Remove the sensor from the paper eject frame. (Insert tweezers to release the hooks securing
the sensor to the paper eject frame. Then pull the sensor off, as shown in the figure below.)
Pap er Eject Frame
Figure 3-12. Removing the HP Sensor
EPSON Stylus 1500 Service Manual
Hook for Sensor
Release Sensor Ca ble
HP Sensor
Tw eezers
Disassembly and Assembly
Release Sensor
HP Sensor Cable
3-15