Viewing Ilo Summary Information; Editing Ilo Access Settings - HPE ProLiant Gen9 User Manual

Viewing iLO summary information

Procedure
1. In the Maintenance window, click iLO.
2. The iLO Configuration Utility window appears.
3. Click Summary. The following information is displayed:
• iLO Hostname—The DNS name of the iLO subsystem, for example, ilo instead of
ilo.example.com. This name can be used only if DHCP and DNS are configured to connect to the
iLO subsystem name instead of the IP address.
• iLO Firmware Version—The version and date of the installed iLO firmware.
• iLO IP Address—The network IP address of the iLO subsystem.
• Server Model—The type of system in which this iLO processor is integrated.
• System ROM—The family and version of the active system ROM.
You can also view this information on the Overview screen in the iLO web interface. For more information,
see the iLO 4 User Guide on the website (http://www.hpe.com/info/ilo/docs).

Editing iLO Access Settings

Edit Access Settings on the following tabs:
• Access Options
• Service
• IPMI/DCMI
Procedure
1. In the iLO Configuration Utility window, click Access Settings.
The Access Options tab data appears.
2. Edit the option(s) as necessary. Click Apply.
Example
Access Options
• Idle Connection Timeout (minutes)—Specifies how long a user can be inactive before the iLO web
interface or Remote Console session ends automatically. The iLO web interface and the Remote
Console track idle time separately because each connection is a separate session. Remote Console
sessions are not affected by this value if a virtual media device is connected. The following settings
are valid:
◦ 15, 30, 60, or 120 minutes—The default value is 30 minutes.
◦ Infinite—Inactive users are not logged out.
46 Viewing iLO summary information