Delete Iscsi Boot Attempts; Deleting Iscsi Boot Attempts; Iscsi Attempts; Viewing And Modifying Iscsi Boot Attempt Details - HPE ProLiant Gen9 User Manual

Delete iSCSI Boot Attempts

Use this option to delete one or more iSCSI boot targets.

Deleting iSCSI boot attempts

Prerequisite
Boot Mode is set to UEFI Mode.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Network Options > iSCSI Boot Configuration > Delete iSCSI Boot Attempts and press
Enter.
2. Select an iSCSI boot target entry and press Enter.
3. Select Commit Changes and Exit.

iSCSI Attempts

Use this option to view or modify the details of iSCSI boot attempts.

Viewing and modifying iSCSI boot attempt details

Prerequisite
Boot Mode is set to UEFI Mode.
Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Network Options > iSCSI Boot Configuration > iSCSI Attempts and press Enter.
2. Select an entry from the list and press Enter to view or modify the details about the boot attempt.

VLAN Configuration

Use this option to set the global VLAN configuration for all enabled network interfaces, including those used in
PXE boot, iSCSI boot, and HTTP boot, and for all pre-boot network access from the Embedded UEFI Shell.

Configuring VLAN Configuration

Procedure
1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration
(RBSU) > Network Options > VLAN Configuration and press Enter.
2. Complete the following and press Enter after each selection or data entry.
68 Delete iSCSI Boot Attempts