Internal Usb Device Option; Install An Internal Usb Device - HPE ProLiant MicroServer Gen10 Plus v2 User Manual

Internal USB device option

Internal USB device option
The server has an internal USB 3.2 Gen 1 port to install a USB device that can be used as a flash boot media or for data backup/redundancy.
Subtopics Subtopics

Install an internal USB device

Install an internal USB device
Install an internal USB device Install an internal USB device
Procedure Procedure
1. Power down the server.
2. Disconnect the power cord from the AC source.
3. Remove the power adapter cord from the power cord clamp, and then disconnect the power adapter from the server.
4. Disconnect all peripheral cables from the server.
5. If installed, unlock and remove the security padlock and/or the Kensington security lock.
For more information, see the lock documentation.
6. If the server is in a vertical orientation, position the server in a horizontal orientation.
HPE ProLiant MicroServer Gen10 Plus v2 User Guide 57