Adjusting The Position Of The Delivery Flapper Solenoid (Sl5); Adjusting The Position Of The Right Deck Pickup Solenoid (Sl6) - Canon iR5000 Service Handbook

4.10 Adjusting the Position of the Delivery Flapper Solenoid
(SL5)
Adjust the position of the mounting screw [2] using the screw [2] so that the drive lever
[1] is pushed fully when the solenoid turns on (i.e., when the plunger is drawn).
4.11 Adjusting the Position of the Right Deck Pickup Solenoid
(SL6)
Adjust the position of the solenoid so that the left edge of the arm 2 is 57.2 ± 0.5 mm
from the center of hole A of the solenoid mounting base.
CHAPTER 2 STANDARDS AND ADJUSTMENTS
[1]
[2]
F02-410-01
[A]
±
57.2 0.5mm
F02-411-01
2-35