M120 Multiservice Edge Router Hardware Guide
See Also
Installing the M120 Air Filter
188
Loosen the captive screws on either side of the air filter faceplate and remove the
4.
faceplate.
Press back and down on the filter to release it from the hooks, then slide it straight
5.
out of the chassis.
Figure 63: Removing the M120 Air Filter
M120 Cooling System Description on page 19
Maintaining the M120 Air Filter on page 263
Troubleshooting the M120 Cooling System on page 286
Installing the M120 Air Filter on page 188
To install the front air filter (see
Attach an ESD grounding strap to your bare wrist and connect the strap to one of the
1.
ESD points on the chassis.
Insert the air filter element into the chassis by sliding it straight into the chassis until
2.
it stops.
Figure 64 on page
189):
Copyright © 2018, Juniper Networks, Inc.