Ac Power Cord Specifications For An Acx5000 Router; Table 26: Ac Power Cord Specifications - Juniper ACX5048 Manual

ACX5048 and ACX5096 Universal Access Router

AC Power Cord Specifications for an ACX5000 Router

Table 26: AC Power Cord Specifications

Country/Region Electrical Specifications
Australia 250 VAC, 10 A, 50 Hz
China 250 VAC, 10 A, 50 Hz
Europe (except Italy, 250 VAC, 10 A, 50 Hz
Switzerland, and United
Kingdom)
Italy 250 VAC, 10 A, 50 Hz
Japan 125 VAC, 12 A, 50 Hz or 60 Hz
North America 125 VAC, 13 A, 60 Hz
South Korea 250 VAC, 10 A, 60 Hz
Switzerland 250 VAC, 10 A, 50 Hz
United Kingdom 250 VAC, 10 A, 50 Hz
54
General Safety Guidelines and Warnings
General Electrical Safety Guidelines and Warnings
Detachable AC power cords are shipped with the chassis, if you include them as part of
your order. The coupler is type C13 as described by International Electrotechnical
Commission (IEC) standard 60320. The plug at the male end of the power cord fits into
the power source outlet that is standard for your geographical location.
NOTE: In North America, AC power cords must not exceed 14.75 feet
(approximately 4.5 meters) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical
Code (CEC) Section 4-010(3). The cords that can be ordered for the ACX
Series routers are in compliance.
Table 26 on page 54 lists AC power cord specifications provided for each country or
region.
Plug Standards Juniper Model Number
AS/NZ 3109-1996 CBL-GP-PWR-C13-AU
GB 1002-1996 CBL-GP-PWR-C13-CH
CEE (7) VII CBL-GP-PWR-C13-EU
CEI 23-16/VII CBL-GP-PWR-C13-IT
JIS C8303 CBL-GP-PWR-C13-JP
CAN/CSA No. 49-92 CBL-GP-PWR-C13-US
KSC 8305; K60884-1 CBL-GP-PWR-C13-KR
SEV 1011 SEV 1991; EN CBL-GP-PWR-C13-SZ
60320 C13
BS 1363/A CBL-GP-PWR-C13-UK
Graphic
Copyright © 2015, Juniper Networks, Inc.