Table of Contents
Advertisement
1.
At the top left of the Control area, click the
2.
At the bottom left of the Control area, click the MIX,
selector.
The corresponding Properties are displayed in the Parameter area on the right.
→
To adjust the displayed Properties:
1.
Click the Page menu (the little arrow) at the top left of the Parameter area to step through
the various Parameter pages, if any. If all parameters are on a single Parameter page, the
arrow of the Page menu is greyed out and disabled.
2.
Use the mouse to adjust the values of the parameters in the displayed page.
12.1.1
Master – Mix Properties (MIX)
The Mix Properties allow you to adjust the level and panoramic position of each Group in your
Project. In other terms, you can adjust here the mix between your Groups that will be sent at
the master output.
Page 1: Level
Page 1 of 2 from the Master's Mix Properties on the controller.
Page 1 of 2 from the Master's Mix Properties in the software.
MASTER
tab.
GRV
or
OUT
MASCHINE MIKRO MK2 - Manual - 316
The Master Properties
button in the Property
The Master
Advertisement
Table of Contents
