Retrieve Name - Symmetricom SSU-2000 Technical Reference

Retrieve Name

This command returns the name assigned to the shelf or to Input or Output ports,
excluding the Line Retiming Module. One name of up to 20 characters is returned
for each port designated by the aid.
Syntax
RTRV-NAME:[tid]:[aid]:ctag;
Parameter
[aid]
Response Format
When the aid is S1A2, the name of the unit is returned. When the aid is an I/O
module or port, the assigned port name is returned. If no name is assigned to a port,
then a null field is returned.
^^^"aid:name" <cr lf>
Related Commands
Retrieve Header, on page 71
Set Name, on page 162
12713020-003-2 Revision F.01 – January 2007
Value
Retrieves the name from the unit.
S1A2
Retrieves the name from the specified module [or port]..
SxAy[-z]
Chapter 2 TL1 Reference
Description
SSU-2000 Technical Reference
Retrieve Name
93