Symmetricom SSU-2000 Technical Reference page 246

Synchronization supply unit and synchronization distribution unit
Hide thumbs Also See for SSU-2000:
Table of Contents

Advertisement

Chapter 3 ICS Command Reference
SNMP
V2USER
INIT
ADD
MODIFY
DELETE
Note: Except for the first built-in entry, Read community: 'public' and
Write community: 'private', all user-added community strings are in
upper case. You can have up to five SNMPv2 user entries, including
the built-in user.
V2MANAGER
INIT
ADD
DELETE
V3USER
INIT
ADD
246 SSU-2000 Technical Reference
SNMPv2 User Table
Clears the whole SNMP user table and only leaves the
built-in users in the systems. This option clears the table.
Adds the SNMP user "read community" to the system. If the
user exists in the system this option exits with an error.
After the read community string is entered, this command
prompts for a write community. Write Community entries
are echoed as '*'. Valid write community characters are all
upper alphanumerical characters. After the write
community string is entered, this command prompts for the
user level.
Modifies the write community and/or the access level for
the given user. If the user id is not in the system, this
command exits with an error. Once the user is entered, this
option performs identically to the 'ADD' option.
Deletes the user from system. If the user id is not in the
system, this command exits with an error.
SNMPv2 Manager Table
Initializes the SNMP Manager Table to all null IP addresses.
Adds an SNMP Manager IP address into the SNMPv2
Manager Table.
Deletes an SNMP Manager IP address from the SNMPv2
Manager Table.
SNMPv3 User Table.
Clears the whole SNMPv3 user table and leaves only the
built-in users in the systems.
Adds the SNMP user "read community" to the system. If the
user exists in the system this option exits with an error.
Then this command shall prompt you to enter
authentication algorithm (HMAC-MD5 or HMAC-SHA).
After the authentication algorithm is chosen, this command
prompts for authentication key and privacy key. The
Authentication and Privacy entries are echoed as '*'. Valid
authentication and privacy characters are all upper-case
alphanumerical characters.
12713020-003-2 Revision F.01 – January 2007

Advertisement

Table of Contents
loading

Related Products for Symmetricom SSU-2000

This manual is also suitable for:

Sdu-2000

Table of Contents