Line 2 contains:
aid = module access identifier
port state [1| 0] where (1 = ON, 0 = OFF), and # = port number
pstate#
1 through 20
Line 3 contains:
= module access identifier
aid
= duty cycle of the module outputs [1|0], where 1 = 5/8, 0 = 50/50
duty#
Line 4 contains:
= module access identifier
aid
= phase compensation [1 – 7] and # = port number 1 through 20
pcomp#
Related Commands
Set CC Output
12713020-003-2 Revision F.01 – January 2007
Parameters, on page 136
Chapter 2 TL1 Reference
Retrieve CC Output Parameters
SSU-2000 Technical Reference
45