Set Gps Input Parameters - Symmetricom SSU-2000 Technical Reference

Set GPS Input Parameters

This command sets the parameters for the GPS Input module.
Syntax
SET-PRMTR-GPS:[tid]:[aid]:ctag::[pri],[pql],[sigma];
Parameter
aid
pri
pql
sigma
Related Commands
Retrieve GPS
Retrieve GPS Available
Retrieve GPS Input
Retrieve GPS
12713020-003-2 Revision F.01 – January 2007
Format
Sets the parameters for the specified GPS Input module.
S1A3 | S1A5
Sets the Priority for the specified module; 0 = Monitor.
0 | 1 - 10
Sets the Priority Quality Level for the specified module.
1 - 16
Sets the limit of the noise measurement, in μs.
10 - 1000
Data, on page 67
Data, on page 66
Parameters, on page 69
Position, on page 70
Chapter 2 TL1 Reference
Set GPS Input Parameters
Description
SSU-2000 Technical Reference 149