Table of Contents
Advertisement
Chapter 3 ICS Command Reference
TIME
TIME
Use this command to access the timekeeping facilities.
Level 0
Not applicable
Level 1
TIME
Use this command to view the current time within the unit. The time is
displayed in the following format:
SSU_2000->time
T18:29:41Z
Level 2
Same as Level 1 operation
Level 3
TIME [T]hh:mm:ss
TIME OFFSET [+/-]hh:mm
If no parameter is given, then the current local time with the local time
offset is displayed.
Options are:
hh:mm:ss
OFFSET
Use this command to set the current time within the unit.
Level 4
Same as Level 3 operation
Remarks None
Related
DATE
RestrictionsNone
252 SSU-2000 Technical Reference
Set the current local time for the unit. If the time is set by a
receiver such as GPS, then the time is locked and cannot
be changed.
Sets the local time offset, which is the difference between
local and UTC time. If local time is ahead of UTC, then
offset is positive; If local time is behind UTC, then offset is
negative.
12713020-003-2 Revision F.01 – January 2007
Advertisement
Table of Contents
