Table of Contents
Advertisement
Chapter 3 ICS Command Reference
Command Syntax
Command Syntax
The ICS interface follows these conventions for expressing command syntax:
All lowercase letters are converted to uppercase.
Command is any valid command consisting of only uppercase letters, excluding
the <Data Separator> and <Command Separator> codes, in this format:
Command [<Data Separator> <data>...][<Command Separator>]
where:
–
<Data Separator>
>
(hex 20) space character. Multiple spaces are converted to a single
space character.
–
<data>
printable ASCII codes and is specified in the command description
section. Use double quotes ("") to imply literal input. All data within the
quotes is accepted as a single data entry, allowing you to enter complex
input strings. The ICS interface does not convert uppercase characters in
quotes to uppercase.
–
<Command Separator>
The interface responds to any input line terminator. Possible terminators are CR,
LF, or CRLF. When the interface receives any of these terminators, the input is
terminated and the entered command line is processed.
The ICS interface uses the following single-character commands:
/
executes the previous command if it is used as the first character on a line.
?
alias of the HELP command.
Command descriptions follow this format:
Command The command name as it appears in the system.
Description Brief description of the command functionality.
Operation
Level 1:
Level 2:
Level 3:
Level 4:
Remarks
Related
Restrictions Special restrictions on the use or operation of this command.
188 SSU-2000 Technical Reference
is any of the following:
The data input for the command. This can be any combination of
is a semicolon (;)
Gives the options and operations for Level 1 (Operator)
Gives the options and operations for Level 2 (Technician)
Gives the options and operations for Level 3 (Supervisor)
Gives the options and operations for Level 4 (Administrator)
Includes comments on the command operation.
Shows any commands related to this command. This command may
affect other commands or be affected by other commands.
or
EOL
12713020-003-2 Revision F.01 – January 2007
Advertisement
Table of Contents
